Waste Water Treatment Manufacturers
Both domestic and industrial processes leads to variety of waste including solids, water and gases. These wastes are absorbed into the environment and can be dangerous. The harm made to the environment can, however, be reduced by taking waste through treatment plants. The end products of the waste treatment plants includes clean water, harmless biodegradable and recycled products The processes involved in the treatment of these wastes differs depending on the source and the type of waste. Wastewater is common in most process including in homes and industries. There are different stages of the wastewater treatment process.
Wastewater from homes is normally treated in septic systems. Though the septic system is simple, it should always remain functional. Septic systems serving a larger number of people are more complex since they have to absorb a higher volume of waste. Large water treatment plants for use in large factories and high residential areas are however available. There are manufacturers of wastewater treatment plants and can help with the design and construction of wastewater treatment plant. The process needs to be carried out per the circumstances. Engineers at the manufacturers will oversee the project from its design stage to monitoring and maintenance works. These systems are complex and require large capital outlay. These systems remove quality clean water and thus used at commercial levels.
The wastewater treatment plants involve three main stages. Water flows to reservoirs either by pumping or gravitational force. There is removal of floating and suspending solids in the reservoirs. The process involves use of centrifugal force. The stage removes about 60% of the suspended solids. Sometimes, chemicals can be used to increase the removal of solids. water is then pumped to the secondary stage which is referred to as the organic stage. In this phase, the remaining biodegradable particles are provided as food to controlled organism such as fish. The organism in the water eat the food particles in the water remove the phosphate and nitrates nutrients in the water. This stage removes over 80% f the water impurities. The water that is released into the environment at this stage is not harmful.
water is however made pure by
taking it to the third stage. It is referred to as the tertiary stage and water can be used for a wide range of uses. The water may be treated using various chemicals to ensure its safety. Some firms use chlorine to remove all impurities though it has become a subject of discussion in the recent.
Water pumped into the wastewater treatment plant should not contain industrial chemicals. The individual factory releasing such waters should take individual responsibility by establishing a treatment plant at their base before releasing such water.
Attributed by: Resources